| |
|
| |
| IAP-6002-WG/WG+ |
| Industrial 802.11 b/g Access Point |
|
 |
|
|
|
| |
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed |
| |
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X/ Radius supported |
| |
Support AP/Bridge/Repeater/AP-Client Mode |
| |
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports |
| |
Redundant Power Inputs: 12~48VDC on terminal block |
| |
Fully Compliant with IEEE802.3af (Power Device at ETH2, IAP-6002-WG+) |
| |
Secured Management by HTTPS and SSH |
| |
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper |
|
| |
| Features |
| |
| |
WLAN interface support up to 54Mbps link speed |
| |
Various kinds of operation modes supported: AP/Bridge/Repeater/AP-Client mode |
| |
Various kinds of encryption supported: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/ WPA2-PSK(TKIP,AES)/802.1X/ Radius |
| |
Dual redundant Ethernet port support redundant mode (Recovery time < 10ms) |
| |
Ethernet switch mode enable Daisy Chain |
| |
Wireless connecting status monitoring |
| |
Versatile modes & event alarm by e-mail |
|
| |
| Introduction |
| |
IAP-6002-WG/WG+ is a reliable 802.11b/g WLAN with 2 ports LAN Access Point. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-6002-WG/WG+ by WEB interface via LAN port or WLAN interface. IAP-6002-WG/WG+ provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IAP-6002-WG+ also provides PD feature on ETH2 which is fully compliant with IEEE802.3af P.O.E. PD specification. Therefore, IAP-6002-WG/ WG+ are one of the best communication solutions for wireless applications on the industrial network. |
|
|
| |
| |
| |
Industrial Access Point |
Industrial Wireless Access Point |
Aust$ |
|
| |
IAP-6002-WG |
Industrial 802.11 b/g Access Point |
$690 |
|
| |
IAP-6002-WG+ |
Industrial 802.11 b/g Access Point with PoE |
$790 |
|
| |
|
|
|
|
|
|
| |
|
